Hoist Block
Whenever you need to raise or lift a heavy object land on a higher level, with a lifting system that you can trust is essential. Unfortunately, whenever there are situations that simply can not use conventional lifting devices, such as forks or fork lifts, and in these situations, when necessary be able to quickly lift a weight, a cantilever lift is often the best option.
These cranes are ideal for small portable lift heavy weights up to 4,000 pounds, depending on model, and are designed to be used in circumstances where other alternatives are not available. The high specification cantilever lifts offering makes them a formidable choice for any workplace, and provide a reliable and complete useful addition to any arsenal equipment.
The standard cantilever lift is a well made and robust device that can move easily in the place where needed and then can effortless lift heavy loads thanks to its heavy hand pump hydraulic lift system of the pump can lift 2000 pounds in a truck in seconds.
The main concern whenever heavy lifting on an uneven surface is to ensure stability. The basic premise of the design of a forklift cantilever is to include a heavyweight against which opposes the load and ensure longitudinal stability in use. This use of a counterweight is supported by a relatively wide chassis on full lock with 8 inches by 2 inch phenolic wheels.
To provide additional support in circumstances where necessary, the cantilever hoist also offers a set of easy to establish surveyors to ensure lateral stability in virtually any condition. Optionally, you can be an added burden to counter for added stability for heavy duty tasks.
The boom of the crane is difficult to use and designed to last. She sits on the degree of rotation 360 sets to allow weight to be hoisted off the ground and then swung effortlessly into the rear of a truck or a raised work surface.
The key to safe and efficient handling of any heavyweight is control, and the cantilever hoists offered by Easy Rack are designed with this in mind from the beginning. Apart around the closed hydraulic system that is designed to ensure maximum lift and smooth action, the release system is also restricted so that not only place the object in place.
Gentle lower the load which means it can be placed with precision and smoothness to protect both her and the surface on which it is being lowered.
The main use of this tool is certainly the lifting weight lifting in the back of a truck, but thanks to the ease with which you can deploy almost anywhere in minutes, a backup is useful for many situations, and can even be used lifting an engine block of a vehicle if necessary, and lifting other work you need a tool that can be trusted to.
About the Author:
Easyrack.org for more information on
material handling equipment
or
gantry & jib cranes
please visit us.
Article Source: ArticlesBase.com – Portable Cantilever Hoists
New truckers knot invention – Tite Tie
|
|
Columbus McKinnon 12368 Wire Stretcher Hoist
$35.13 Roller bearing. Malleable hoods grips. All steel safety lock. 2 0 x 30" chain. Automotive red finish. No. 12368: No. 44, 3 8" x 16' rope, 4 sheaves, 250 lb. working load limit No. 12369: No. 88, 1 2" x 50' rope, 4 heavy sheaves, 450 lb. working load limit... |
|
|
Rope Pulley Block and Tackle Hoist
$22.99 2 ton hand block and tackle (4000 pounds) capacity four wheel rope pully hoist.... |
|
|
Superwinch 7750A Pulley Block
$55.74 Used properly, this multipurpose pulley block can double the pulling power of your winch to 20,000 lbs., or change the pulling direction without damage to the wire rope. A pulley block can also lower the Amp draw and heat buildup in your winch. U.S.A. Capacity (Ton): 10, Works With: Winch and Wire Rope... |
|
|
Grizzly2 G8703 Chain Hoist/Hook/Block - 1/2 Ton
$44.95 Unbeatable for those heavy lifting chores. These hoists can be mounted to a fixed point or a movable trolley system. The simple chain-and-pulley gearing system is highly efficient, allowing very little hand pressure to lift a heavy weight. Can be used in remote locations where power may not be available. Heavy-duty forged hooks with lock tabs insure the load stay on the hook. Self-adjusting b... |
|
|
Micro Machines Ace Road Builders Hiways & Byways Playset
$98.31 Produced by Galoob in 1994. Rare. Approximate size of unopened packaging is 9 x 8 x 2.5 inches. The approximate size of a Micro Machines vehicle is 1.5 inches long. Micro Machines Vehicles are Sold Separately and Not Included with this Playset.... |
|
|
Micro Machines Construction City Hiways & Byways Playset
$129.77 Produced by Galoob in 1995. Rare Collectible Set from 1995 for Micro Machines Collectors! Approximate Size of Unopened Box is 12 x 7 x 3.5 inches! Additional vehicles are sold separately.... |
|
|
Grip 302/351 Small Block Ford Engine Cradle
$37.99 Ideal for use when storing, transporting, and working on engines. Heavy duty steel construction for added strength. Powder coat finish resists rust and corrosion. Four swivel steel casters for easy maneuverability. Maximum capacity - 1000 lbs.... |
|
|
Engine Cradle (For ALL V8 Chevy Blocks)
$39.99 Heavy Duty Steel Construction For Added StrengthFour 3" Swivel Casters for Easy ManeuverabilityPower Coating FinishCapacity: 1000 LbsUniversal: For All V8 Chevy Small or Big BlocksWeight: 23 Lbs... |
|
|
US Army, Technical Manual, TM 5-3810-232-34, CRANE MOUNTED: 20-TON AT 10 FOOT RADIUS; 2 ENGINES, DIESEL ENGINE DRI 4X4, AIR TRANSPORTABLE, 3 PHASE W/BLADE, ... AND (MODEL 2385) (3810-00-043-5354)
$0.99 US Army, Technical Manual, TM 5-3810-232-34, CRANE MOUNTED: 20-TON AT 10 FOOT RADIUS; 2 ENGINES, DIESEL ENGINE DRI 4X4, AIR TRANSPORTABLE, 3 PHASE W/BLADE, BULLDOZER, EARTHMOVING W/BLOCK, TACKLE, 20-TON W/BOOM, CRANE, 30 FOOT (AMERICAN HOIST DERRICK MODEL 2380) (NSN 3810-00-763-7728) AND (MODEL 2385) (3810-00-043-5354) ... |
|
|
Ford Hoists Bulletin No. 6G
... |
